1PCS Real Carbon Fiber Garage Remote Control Button Switch Cover Trim Compatible for Chevrolet Corvette C7 2014 2015 2016 2017 2018 2019, Car Interior Decor Modification Accessory

🧭Installation instructions (for products with double-sided tape on the back): ➤ Make sure the surface to which the product is to be pasted is clean, dry and free of any dirt or debris. ➤ Carefully determine the required mounting location and compare it to the product to ensure compatibility with your vehicle. If the product is not suitable, please contact us immediately and do not install. ➤ When tearing off the double-sided tape on the back of the product, avoid touching the double-sided tape with your hands to prevent contaminants from affecting the adhesion. ➤ For best bonding results, we recommend using a hair dryer or lighter to heat the double-sided tape if the temperature is below 20 degrees Celsius. Be careful not to heat above 40 degrees Celsius. ➤ Align the product position and press it firmly into place. The effectiveness of the bond depends on surface condition and correct installation technique. ➤ After installation, apply firm pressure, especially on the edges of the product, and hold for at least 2 minutes to ensure proper bonding. ➤ Avoid contact with water and keep product dry for at least 72 hours after installation. Failure to do so may result in adhesive damage and product detachment. 🧭Installation instructions (for products without double-sided tape on the back): ➤ If the product does not have double-sided tape on the back, installation will be easier, just place it directly or use tools.

• ☑️✔️【Compatibility】: Perfect OEM custom fit for all 2014, 2015, 2016, 2017, 2018, 2019 Chevrolet Corvette C7 models, including Stingray, Grand Sport, Z06 & ZR1 variants. Produced according to original car scanning data, seamless close fit without gaps, no cutting or drilling required.
• ☑️✔️【HIGH QUALITY MATERIAL】: Constructed with full real dry carbon fiber, clear woven texture, high toughness, scratch-proof, wear-resistant and long-term anti-fading. Not cheap ABS plastic with printed carbon pattern. Bring authentic racing carbon fiber aesthetic to your sports car interior.
• ☑️✔️【Easy Installation】: Pre-installed automotive-grade 3M double-sided adhesive tape on the back. Steps: clean installation surface thoroughly → tear off adhesive film → align the cover with original garage remote switch panel → press tightly for 60 seconds. Firm adhesion, will not fall off during driving; no glue residue left when removed, no damage to original car interior.
• ☑️✔️【Enhanced Protection】: Fully wraps the factory garage door opener switch panel. Effectively prevent original buttons from dust, fingerprint stains, daily scratches and abrasion. Upgrade the plain stock interior to aggressive supercar racing style, greatly enhance interior premium feel for your Corvette C7.
• ☑️✔️【100% SATISFACTION GUARANTEE】: Package Included: 1 x Real Carbon Fiber Garage Door Opener Switch Cover only. Every product is strictly inspected before shipping.