150ml Tool Dip Rubber Coating,Flexible Peelable Protective Coating, Blue

Product Name:Tool Dip Rubber CoatingCapacity:150mlColor：BluePackage Included:1 * 150 ml Tool Dip Rubber Coating1*BrushInstructions for use:1. Clean the substrate surface to ensure it is flat, solid, and free of contaminants;2. Stir the rubber coating solution thoroughly after opening the container to prevent sedimentation (Avoid vigorous stirring to prevent air bubbles)3. Immerse the product in the coating solution or apply an even, thin coat using a brush to prevent sagging or uneven drying caused by excessive thickness;4. Allow 1-2 hours for initial drying and curing; full cure requires 24 hours5. For multiple coats, ensure each layer is completely dry before applying the next (typically 2-3 coats achieve ideal thickness)6. Inspect coating integrity after drying. Touch up any bubbles or missed areas locally and re-dry.Removal steps (peeling off the coating)1. Make sure the coating is completely cured.2. Use a plastic scraper or fingernail to gently pry up from the edge of the coating to find the separation point.3. Slowly peel off the coating and try to keep the whole piece peeled off .4. Clean the substrate to ensure there is no glue.Things to note:1. Use in a well-ventilated area. Wear gloves and a mask.2. Keep away from heat/open flame. Do not use on hot surfaces.3.Hang to dry, avoid touching.4. Store in a cool, dry place.5. If product gets into eyes, rinse immediately with water. Seek medical attention if discomfort persists.

• Peelable rubber coating: Its liquid rubber formulation is safe and supports dip coating/brush application. Once dry, it forms a flexible, removable protective layer that effectively prevents surface scratches and abrasion without leaving permanent adhesive residue. Additionally, the coating provides a protective layer resistant to wear, tear, and impact, ensuring long-term performance.
• Waterproof and Durable: The rubber coating applied to this tool forms a flexible rubber membrane that seals gaps to effectively block moisture. It can be reapplied as needed for sustained protection. This safeguards plastic handles, pliers, hardware, and hand tools from wear, ensuring long-term usability.
• User-Friendly Application: Effortless dip coating or spraying enables rapid coating completion. Immerse objects in the coating or apply with a brush to clean surfaces. The rubber coating surface dries in 15-30 minutes and fully cures within 24 hours. Accelerate curing with drying equipment if needed. Peelable when required; no scraping or solvents needed. Complete removal leaves substrates undamaged.
• Enhanced Grip: Rubber coating improves stability when holding objects, increases surface friction, and forms a soft surface to enhance grip on tools, handles, or electronic devices. Ensures a firm hold, prevents tools from slipping, and reduces the risk of slippage.
• Multi-purpose application: Suitable for metal/plastic tools (e.g., wrenches, pliers, scissors), tool handles, electronic cables, automotive interiors, and DIY equipment wrapping. Forms a durable protective layer and enhances longevity.